Category 4 cable (Cat 4) is a cable that consists of eight copper wires arranged in four unshielded twisted pairs (UTP) supporting signals up to 20 MHz. It is used in telephone networks which can transmit voice and data up to 16

Mbit The megabit is a multiple of the unit bit for digital information. The prefix mega (symbol M) is defined in the International System of Units (SI) as a multiplier of 106 (1 million), and therefore :1 megabit = = = 1000 kilobits. The megabit ...

/s. For a brief period it was used for some

Token Ring Token Ring network IBM hermaphroditic connector with locking clip. Screen contacts are prominently visible, gold-plated signal contacts less so. Token Ring is a computer networking technology used to build local area networks. It was introduc ...

10BASE-T 1 (one, unit, unity) is a number representing a single or the only entity. 1 is also a numerical digit and represents a single unit of counting or measurement. For example, a line segment of ''unit length'' is a line segment of length 1 ...

, and

100BASE-T4 In computer networking, Fast Ethernet physical layers carry traffic at the nominal rate of 100 Mbit/s. The prior Ethernet speed was 10 Mbit/s. Of the Fast Ethernet physical layers, 100BASE-TX is by far the most common. Fast Ether ...

networks, but was quickly superseded by

Category 5 cable Category 5 cable (Cat 5) is a twisted pair cable for computer networks. Since 2001, the variant commonly in use is the Category 5e specification (Cat 5e). The cable standard provides performance of up to 100 MHz and is ...

. It is no longer common or used in new installations and is not recognized by the current version of the

ANSI/TIA-568 ANSI/TIA-568 is a technical standard for commercial building cabling for telecommunications products and services. The title of the standard is ''Commercial Building Telecommunications Cabling Standard'' and is published by the Telecommunications ...

data cabling standards.

References

{{UTP Cable Standards Ethernet cables