Allowable Stress Design
   HOME

TheInfoList



OR:

Permissible stress design is a design philosophy used by
mechanical engineer Mechanical may refer to: Machine * Machine (mechanical), a system of mechanisms that shape the actuator input to achieve a specific application of output forces and movement * Mechanical calculator, a device used to perform the basic operations of ...
s and
civil engineer A civil engineer is a person who practices civil engineering – the application of planning, designing, constructing, maintaining, and operating infrastructure while protecting the public and environmental health, as well as improving existing ...
s. The civil designer ensures that the stresses developed in a structure due to service loads do not exceed the
elastic limit In materials science and engineering, the yield point is the point on a stress-strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and wi ...
. This limit is usually determined by ensuring that stresses remain within the limits through the use of factors of safety. In
structural engineering Structural engineering is a sub-discipline of civil engineering in which structural engineers are trained to design the 'bones and muscles' that create the form and shape of man-made structures. Structural engineers also must understand and cal ...
, the permissible stress design approach has generally been replaced internationally by
limit state design Limit State Design (LSD), also known as Load And Resistance Factor Design (LRFD), refers to a design method used in structural engineering. A limit state is a condition of a structure beyond which it no longer fulfills the relevant design criteria ...
(also known as ultimate stress design, or in USA, Load and Resistance Factor Design, LRFD) as far as
structural engineering Structural engineering is a sub-discipline of civil engineering in which structural engineers are trained to design the 'bones and muscles' that create the form and shape of man-made structures. Structural engineers also must understand and cal ...
is considered, except for some isolated cases. In USA structural engineering construction, allowable stress design (ASD) has not yet been completely superseded by limit state design except in the case of
Suspension bridges A suspension bridge is a type of bridge in which the deck is hung below suspension cables on vertical suspenders. The first modern examples of this type of bridge were built in the early 1800s. Simple suspension bridges, which lack vertical ...
, which changed from allowable stress design to limit state design in the 1960s. Wood, steel, and other materials are still frequently designed using allowable stress design, although LRFD is probably more commonly taught in the USA university system. In
mechanical engineering Mechanical engineering is the study of physical machines that may involve force and movement. It is an engineering branch that combines engineering physics and mathematics principles with materials science, to design, analyze, manufacture, and ...
design such as design of pressure equipment, the method uses the actual loads predicted to be experienced in practice to calculate stress and deflection. Such loads may include pressure thrusts and the weight of materials. The predicted stresses and deflections are compared with allowable values that have a "factor" against various failure mechanisms such as leakage, yield, ultimate load prior to plastic failure, buckling, brittle fracture, fatigue, and vibration/harmonic effects. However, the predicted stresses almost always assumes the material is linear elastic. The "factor" is sometimes called a factor of safety, although this is technically incorrect because the factor includes allowance for matters such as local stresses and manufacturing imperfections that are not specifically calculated; exceeding the allowable values is not considered to be good practice (i.e is not "safe"). The permissible stress method is also known in some national standards as the working stress method because the predicted stresses are the unfactored stresses expected during operation of the equipment (e.g. AS1210, AS3990). This mechanical engineering approach differs from an ultimate design approach which factors up the predicted loads for comparison with an ultimate failure limit. One method factors up the predicted load, the other method factors down the failure stress. Structural engineering Civil engineering Mechanical engineering {{engineering-stub