Continuous mandatory ventilation (CMV) is a
mode of mechanical ventilation
Modes of mechanical ventilation are one of the most important aspects of the usage of mechanical ventilation. The mode refers to the method of inspiratory support. In general, mode selection is based on Respiratory therapist, clinician familiarit ...
in which breaths are delivered based on set variables. Still used in the operating room, in previous nomenclature, CMV referred to "controlled mechanical ventilation" ("control mode ventilation"), a mode of ventilation characterized by a ventilator that makes no effort to sense patient breathing effort. In continuous mandatory ventilation, the ventilator can be triggered either by the patient or mechanically by the ventilator. The ventilator is set to deliver a breath according to parameters selected by the operator. "Controlled mechanical ventilation" is an outdated expansion for "CMV"; "continuous mandatory ventilation" is now accepted standard
nomenclature for mechanical ventilation. CMV today can assist or control itself dynamically, depending on the transient presence or absence of spontaneous breathing effort. Thus, today's CMV
would have been called ACV (assist-control ventilation) in older nomenclature, and the original form of CMV is a thing of the past. But despite continual technological improvement over the past half century, CMV may still be uncomfortable for the patient.
Expected outcomes and considerations.
Continuous mandatory ventilation is associated with profound diaphragm muscle dysfunction and atrophy.
CMV is no longer the preferred mode of mechanical ventilation.
Volume-controlled CMV
Limit
Limits in VC-CMV may be set and pressure based. The ventilator will attempt to deliver the set tidal volume by utilizing whatever pressure is required to reach its setting. A pressure limit may be added to limit damage to the lungs (
barotrauma
Barotrauma is physical damage to body tissues caused by a difference in pressure between a gas space inside, or in contact with, the body and the surrounding gas or liquid. The initial damage is usually due to over-stretching the tissues in ...
).
Cycle
Expiration cycling can be set by time or the pressure limit. Once the T
i (inspiratory time) is reached, or a pressure limit is reached, the ventilator will cycle into expiratory mode and allow passive exhalation until another breath is triggered.
Pressure-controlled CMV
Pressure control (PC) is a pressure-controlled mode of ventilation. The ventilator delivers a flow to maintain the preset pressure at a preset
respiratory rate
The respiratory rate is the rate at which breathing occurs; it is set and controlled by the respiratory center of the brain. A person's respiratory rate is usually measured in breaths per minute.
Measurement
The respiratory rate in humans is mea ...
over a preset inspiratory time.
The pressure is constant during the inspiratory time, and the flow is decelerating. If, for any reason, pressure decreases during inspiration, the flow from the ventilator will immediately increase to maintain the set inspiratory pressure.
[MAQUET, "Modes of ventilation in SERVO-s, Invasive and Non-invasive", 2009 MAQUET Critical Care AB, Order No 66 61 131]
Dual-control modes
Dual-control modes are
pressure-controlled modes with an exhaled
tidal volume
Tidal is the adjectival form of tide.
Tidal may also refer to:
* ''Tidal'' (album), a 1996 album by Fiona Apple
* Tidal (king), a king involved in the Battle of the Vale of Siddim
* TidalCycles
TidalCycles (also known as Tidal) is a live coding ...
target. They work on a breath-by-breath basis and provide pressure-limited, time-cycled breaths, increasing or decreasing the pressure of the next breath as necessary to achieve a user-selected desired tidal volume. They are known by various vendor-specific terms such as pressure-regulated volume control (
Siemens
Siemens AG ( ) is a German multinational technology conglomerate. It is focused on industrial automation, building automation, rail transport and health technology. Siemens is the largest engineering company in Europe, and holds the positi ...
), autoflow (
Dräger), adaptive-pressure ventilation (Hamilton Medical), and volume-control plus (
Covidien
Covidien plc was an Irish-headquartered global health care products company and manufacturer of medical devices and supplies. Covidien became an independent publicly traded company after being spun off from Tyco International in 2007. It was pu ...
), among others.
Out-dated terminology
Many terms have been developed to describe the same
modes of mechanical ventilation
Modes of mechanical ventilation are one of the most important aspects of the usage of mechanical ventilation. The mode refers to the method of inspiratory support. In general, mode selection is based on Respiratory therapist, clinician familiarit ...
. The
nomenclature of mechanical ventilation
Many terms are used in mechanical ventilation, some are specific to brand, model, trademark and mode of mechanical ventilation. There is a standardized nomenclature of mechanical ventilation that is specific about nomenclature related to modes, b ...
has become more standardized, and these terms are no longer preferred but may still be seen in older research.
[Chatburn RL. Classification of ventilator modes: update and proposal for implementation. Respir Care 2007; 52:301–323. ] There are many different names that were historically used to refer to CMV but now refer to Assist Control.
Names such as volume control ventilation and volume cycled ventilation in modern usage refer to the Assist Control mode.
* Assist/control
* A/C
* CMV
* Volume assist/control
* Volume control
* Volume limited ventilation
* Volume controlled ventilation
* Controlled ventilation
* Volume targeted ventilation
See also
*
Continuous spontaneous ventilation Continuous spontaneous ventilation is any mode of mechanical ventilation where every breath is spontaneous (i.e., patient triggered and patient cycled).
Spontaneous breathing is defined as the movement of gas in and out of the lungs that is produce ...
*
List of modes of mechanical ventilation by category
Modes of mechanical ventilation has only had an established nomenclature since 2008. It is suggested that the modes categorized under the following sections be referred to as their section header instead of their individual name, which is often a ...
*
Modes of mechanical ventilation
Modes of mechanical ventilation are one of the most important aspects of the usage of mechanical ventilation. The mode refers to the method of inspiratory support. In general, mode selection is based on Respiratory therapist, clinician familiarit ...
*
Pressure controlled continuous mandatory ventilation Continuous mandatory ventilation (CMV) is a mode of mechanical ventilation in which breaths are delivered based on set variables. Still used in the operating room, in previous nomenclature, CMV referred to "controlled mechanical ventilation" ("contr ...
*
Pressure controlled intermittent mandatory ventilation
Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and eve ...
*
Volume controlled intermittent mandatory ventilation
Volume is a measure of regions in three-dimensional space. It is often quantified numerically using SI derived units (such as the cubic metre and litre) or by various imperial or US customary units (such as the gallon, quart, cubic inch). The ...
References
{{Mechanical ventilation
Respiratory therapy
Mechanical ventilation