|
Weaving Shed
A weaving shed is a distinctive type of cotton mill, mill developed in the early 1800s in Lancashire, :Derbyshire and Yorkshire to accommodate the new power looms weaving cotton, silk, woollen and worsted. A weaving shed can be a stand-alone mill, or a component of a combined mill. Power looms cause severe vibrations requiring them to be located on a solid ground floor. In the case of cotton, the weaving shed needs to remain moist. Maximum daylight is achieved, by the sawtooth "north-facing roof lights". History The early textile trade relied on domestic outworker, outworking. Handloom weavers would take the yarn to their Weavers' cottage, cottage loom shops, and return the completed fabric to the mill. Reliable power looms that could be worked from an overhead line shaft were not available before Kenworthy and Bulloughs weft stop motion, the roller temple and the loose reed which appeared in the 1840s. The first weaving floors were on the ground floor of the existing cotton m ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weaving Shed, Queen Street Mill - Geograph
Weaving is a method of textile production in which two distinct sets of yarn, yarns or threads are interlaced at right angles to form a textile, fabric or cloth. Other methods are knitting, crocheting, felting, and braid, braiding or plaiting. The longitudinal threads are called the Warp (weaving), warp and the lateral threads are the weft, woof, or filling. The method in which these threads are interwoven affects the characteristics of the cloth. Cloth is usually woven on a loom, a device that holds warp threads in place while filling threads are woven through them. A fabric band that meets this definition of cloth (warp threads with a weft thread winding between) can also be made using other methods, including tablet weaving, back strap loom, or other techniques that can be done without looms. The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave, satin weave ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Leather Belt
Leather is a strong, flexible and durable material obtained from the tanning, or chemical treatment, of animal skins and hides to prevent decay. The most common leathers come from cattle, sheep, goats, equine animals, buffalo, pigs and hogs, ostriches, and aquatic animals such as seals and alligators. Leather can be used to make a variety of items, including clothing, footwear, handbags, furniture, tools and sports equipment, and lasts for decades. Leather making has been practiced for more than 7,000 years and the leading producers of leather today are China and India. Critics of tanneries claim that they engage in unsustainable practices that pose health hazards to the people and the environment near them. Production processes The leather manufacturing process is divided into three fundamental subprocesses: preparatory stages, tanning, and crusting. A further subprocess, finishing, can be added into the leather process sequence, but not all leathers receive finishing ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reed (weaving)
A reed is part of a weaving loom, and resembles a comb or a frame with many vertical slits. It is used to separate and space the warp threads, to guide the shuttle's motion across the loom, and to push the weft threads into place."Reed." ''The Oxford English Dictionary''. 2nd ed. 1989.1911 Encyclopædia Britannica In most floor looms with, the reed is securely held by the beater. Floor looms and mechanized looms both use a beater with a reed, whereas Inkle weaving and tablet weaving do not use reeds. History Modern reeds are made by placing flattened strips of wire (made of carbon or stainless steel) between two half round ribs of wood, and binding the whole together with tarred string. Historically, reeds were made of reed or split cane. The split cane was then bound between ribs of wood in the same manner as wire is now. In 1738, John Kay replaced split cane with flattened iron or brass wire, and the change was quickly adopted. To make a reed, wire is flattened to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Heddle
A heddle or heald is an integral part of a loom. Each thread in the warp passes through a heddle,"Weaving." ''The Encyclopædia Britannica''. 11th ed. 1911. which is used to separate the warp threads for the passage of the weft."Heddle." ''The Oxford English Dictionary''. 2nd ed. 1989. The typical heddle is made of cord or wire and is suspended on a shaft of a loom. Each heddle has an eye in the center where the warp is threaded through. As there is one heddle for each thread of the warp, there can be near a thousand heddles used for fine or wide warps. A handwoven tea-towel will generally have between 300 and 400 warp threads and thus use that many heddles. In weaving, the warp threads are moved up or down by the shaft. This is achieved because each thread of the warp goes through a heddle on a shaft. When the shaft is raised the heddles are too, and thus the warp threads threaded through the heddles are raised. Heddles can be either equally or unequally distributed on the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sizing Machine
Sizing or size is a substance that is applied to, or incorporated into, other materials—especially papers and textiles—to act as a protective filler or glaze. Sizing is used in papermaking and textile manufacturing to change the absorption and wear characteristics of those materials. Sizing is used for oil-based surface preparation for gilding (sometimes called ''mordant'' in this context). It is used by painters and artists to prepare paper and textile surfaces for some art techniques. Sizing is used in photography to increase the sharpness of a print, to change the glossiness of a print, or for other purposes depending on the type of paper and printing technique. Fibers used in composite materials are treated with various sizing agents to promote adhesion with the matrix material. Sizing is used during paper manufacture to reduce the paper's tendency when dry to absorb liquid, with the goal of allowing inks and paints to remain on the surface of the paper and to dry the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Creel (textiles)
Creel and Creels can refer to: *Creel (basket), a type of basket used in fly fishing and commercial fishing *Creel (surname) *Creel, Chihuahua, a town in Mexico *Creel-Terrazas Family, a notable family in the Mexican state of Chihuahua *a series of bobbins holding the roving on a Spinning mule#The first mule, spinning mule *an overhead clothes airer *a List of craters on Mars: A–G, crater on Mars *Creels, West Virginia *Jargon for a type of fishing or shellfishing harvester interview to determine Catch Per Unit Effort See also * *Creal (other) *Creole (other) *Creelman, a surname {{disambiguation ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Beamer (occupation)
A beamer was an occupation in the cotton industry. The taper's beam is a long cylinder with flanges where 400 plus ends (threads) are wound side-by-side. Creels of bobbins with the correct thread, mounted on a beaming frame wind their contents onto the beam. The machine is watched over by a "beamer". In early days beaming was often done in the weaving shed but later the process tended to be transferred to the spinning mill. The spinners would send lorries loaded with of beams wound with thread of the ordered specification to the weavers. Several tapers beams would be attached to creels on the Tape Sizing machine, and the threads from these would be sized and combined to create the smaller weavers beams. As a rule of thumb, a tapers beam had thread long enough to make 20 weavers beams. Colloquially, the term beamer was used for anyone responsible for moving beams of yarn. In a weaving shed that bought its yarn on the beam, the Beamer would be the operative who carried new beams ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Warp (weaving)
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread and yarn into textile fabrics. The vertical ''warp'' yarns are held stationary in tension on a loom (frame) while the horizontal ''weft'' (also called the ''woof'') is drawn through (inserted over and under) the warp thread. In the terminology of weaving, each warp thread is called a ''warp end''; a ''pick'' is a single weft thread that crosses the warp thread (synonymous terms are ''fill yarn'' and ''filling yarn'').Burnham (1980), pp. 170, 179Barber (1991), p. 79. In the 18th century, the Industrial Revolution facilitated the industrialisation of the production of textile fabrics with the "picking stick" and the " flying shuttle", the latter of which was invented by John Kay, in 1733. The mechanised power loom was patented by Edmund Cartwright in 1785, which allowed sixty picks per minute. Etymology The word ''weft'' derives from the Old English word , to weave. ''Wa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Pirn
A pirn is a rod onto which weft thread is wound for use in weaving. Unlike a bobbin, it is fixed in place, and the thread is delivered off the end of the pirn rather than from the centre. A typical pirn is made of wood or plastic and is slightly tapered for most of its length, flaring out more sharply at the base, which fits over a pin in the shuttle. Pirns are wound from the base forward in order to ensure snag-free delivery of the thread, unlike bobbins, which are wound evenly from end to end. Pirns became important with the development of the flying shuttle The flying shuttle is a type of weaving shuttle. It was a pivotal advancement in the mechanisation of weaving during the initial stages of the Industrial Revolution, and facilitated the weaving of considerably broader fabrics, enabling the p ..., though they are also used with other end delivery shuttles. Power looms which use pirns generally have automatic changing mechanisms which remove the spent pirn from the shu ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weft
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread (yarn), thread and yarn into textile fabrics. The vertical ''warp'' yarns are held stationary in tension on a loom (frame) while the horizontal ''weft'' (also called the ''woof'') is drawn through (inserted over and under) the warp thread. In the terminology of weaving, each warp thread is called a ''warp end''; a ''pick'' is a single weft thread that crosses the warp thread (synonymous terms are ''fill yarn'' and ''filling yarn'').Burnham (1980), pp. 170, 179Barber (1991), p. 79. In the 18th century, the Industrial Revolution facilitated the industrialisation of the production of textile fabrics with the "picking stick" and the "flying shuttle", the latter of which was invented by John Kay (flying shuttle), John Kay, in 1733. The mechanised power loom was patented by Edmund Cartwright in 1785, which allowed sixty picks per minute. Etymology The word ''weft'' derives from ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
