Combined Gas And Steam
Combined gas and steam (COGAS) is a type of marine propulsion system comprising Gas turbine, gas and Steam turbine, steam turbines, the latter being driven by steam generated using the heat from the exhaust of the gas turbines. System In this way, some of the otherwise lost energy can be reclaimed and the specific fuel consumption (shaft engine), specific fuel consumption of the plant can be decreased. Large (land-based) electric powerplants built using this combined cycle can reach conversion efficiencies of over 60 %. If the turbines do not drive a propeller shaft directly and instead a turbine–electric transmission is used, the system is known as COGES (combined gas–electric and steam). COGAS differs from many other combined marine propulsion systems in that it is not intended to operate on one system alone. While this is possible, it will not operate efficiently this way, as with combined diesel and gas (CODAG) systems when run solely on diesel engines. Especially COGA ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Marine Propulsion
Marine propulsion is the mechanism or system used to generate thrust to move a watercraft through water. While paddles and sails are still used on some smaller boats, most modern ships are propelled by mechanical systems consisting of an electric motor or internal combustion engine driving a propeller, or less frequently, in pump-jets, an impeller. Marine engineering is the discipline concerned with the engineering design process of marine propulsion systems. Human-powered watercraft, Human-powered paddles and oars, and later, sails were the first forms of marine propulsion. Rowed galleys, some equipped with sail, played an important early role in early human seafaring and naval warfare, warfare. The first advanced mechanical means of marine propulsion was the marine steam engine, introduced in the early 19th century. During the 20th century it was replaced by two-stroke diesel engine, two-stroke or four-stroke diesel engines, outboard motors, and gas turbine engines on faster sh ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Celebrity Cruises
Celebrity Cruises is a cruise line headquartered in Miami, Florida, and a wholly owned subsidiary of Royal Caribbean Group. Celebrity Cruises was founded in 1988 by the Greece-based Chandris Group, and merged with Royal Caribbean Cruise Line in 1997.Maritime Matters: Sun Vista retrieved 29. 11. 2007 History Chandris Group (1988–1997) Founding and first ship SS ''Meridian'' Celebrity Cruises was founded in April 1988 as a subsidiary of the Greek shipping, Greece-based Chandris Group to operate upmarket cruise ships to Bermuda. Chandris had been involved in cruise traffic since the 1960s, and during the late 1980s the company operated in the United States market under the ...[...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Steam Power
A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be transformed by a connecting rod and crank into rotational force for work. The term "steam engine" is most commonly applied to reciprocating engines as just described, although some authorities have also referred to the steam turbine and devices such as Hero's aeolipile as "steam engines". The essential feature of steam engines is that they are external combustion engines, where the working fluid is separated from the combustion products. The ideal thermodynamic cycle used to analyze this process is called the Rankine cycle. In general usage, the term ''steam engine'' can refer to either complete steam plants (including boilers etc.), such as railway steam locomotives and portable engines, or may refer to the piston or turbine machinery alone, a ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Marine Propulsion
Marine propulsion is the mechanism or system used to generate thrust to move a watercraft through water. While paddles and sails are still used on some smaller boats, most modern ships are propelled by mechanical systems consisting of an electric motor or internal combustion engine driving a propeller, or less frequently, in pump-jets, an impeller. Marine engineering is the discipline concerned with the engineering design process of marine propulsion systems. Human-powered watercraft, Human-powered paddles and oars, and later, sails were the first forms of marine propulsion. Rowed galleys, some equipped with sail, played an important early role in early human seafaring and naval warfare, warfare. The first advanced mechanical means of marine propulsion was the marine steam engine, introduced in the early 19th century. During the 20th century it was replaced by two-stroke diesel engine, two-stroke or four-stroke diesel engines, outboard motors, and gas turbine engines on faster sh ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Combined Cycle Powered Railway Locomotive
A combined cycle powered locomotive is a patented idea to use two primary movers, a gas turbine with a steam turbine to gain the efficiency of a combined cycle power plant or a combined gas and steam engine. Steam locomotives were tested in the past but were not ideal for low speeds, and gas turbine locomotives ( GTELs) were used by Union Pacific until the 1970s. Combined cycle power uses the heat from the gas turbine to make steam from the water to turn a steam turbine, instead of that heat getting exhausted out and wasted. Engine efficiency for combined cycle can achieve 60% compared to diesel motors' 45% efficiency. The gas and steam turbines would turn their separate generators and the steam turbine would have a clutch between it and its generator because steam power is not easily adjustable. Compressed hydrogen would be in one fuel tank, and water would be in another storage tank for the steam, and the Rankine cycle could condense most of the steam back to water to put ba ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Combined Cycle
A combined cycle power plant is an assembly of heat engines that work in tandem from the same source of heat, converting it into mechanical energy. On land, when used to make electricity the most common type is called a combined cycle gas turbine (CCGT) plant, which is a kind of gas-fired power plant. The same principle is also used for marine propulsion, where it is called a combined gas and steam (COGAS) plant. Combining two or more thermodynamic cycles improves overall efficiency, which reduces fuel costs. The principle is that after completing its cycle in the first engine, the working fluid (the exhaust) is still hot enough that a second subsequent heat engine can extract energy from the heat in the exhaust. Usually the heat passes through a heat exchanger so that the two engines can use different working fluids. By generating power from multiple streams of work, the overall efficiency can be increased by 50–60%. That is, from an overall efficiency of the system of say ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Cogeneration
Cogeneration or combined heat and power (CHP) is the use of a heat engine or power station to generate electricity and useful heat at the same time. Cogeneration is a more efficient use of fuel or heat, because otherwise- wasted heat from electricity generation is put to some productive use. Combined heat and power (CHP) plants recover otherwise wasted thermal energy for heating. This is also called combined heat and power district heating. Small CHP plants are an example of decentralized energy. By-product heat at moderate temperatures ( can also be used in absorption refrigerators for cooling. The supply of high-temperature heat first drives a gas or steam turbine-powered generator. The resulting low-temperature waste heat is then used for water or space heating. At smaller scales (typically below 1 MW), a gas engine or diesel engine may be used. Cogeneration is also common with geothermal power plants as they often produce relatively low grade heat. Binary cycle ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Crankshaft
A crankshaft is a mechanical component used in a reciprocating engine, piston engine to convert the reciprocating motion into rotational motion. The crankshaft is a rotating Shaft (mechanical engineering), shaft containing one or more crankpins, that are driven by the pistons via the connecting rods. The crankpins are also called ''rod bearing journals'', and they rotate within the "big end" of the connecting rods. Most modern crankshafts are located in the engine block. They are made from steel or cast iron, using either a forging, casting (metalworking), casting or machining process. Design The crankshaft is located within the engine block and held in place via main bearings which allow the crankshaft to rotate within the block. The up-down motion of each piston is transferred to the crankshaft via connecting rods. A flywheel is often attached to one end of the crankshaft, in order to smoothen the power delivery and reduce vibration. A crankshaft is subjected to enormou ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Waste Heat
Waste heat is heat that is produced by a machine, or other process that uses energy, as a byproduct of doing work. All such processes give off some waste heat as a fundamental result of the laws of thermodynamics. Waste heat has lower utility (or in thermodynamics lexicon a lower exergy or higher entropy) than the original energy source. Sources of waste heat include all manner of human activities, natural systems, and all organisms, for example, incandescent light bulbs get hot, a refrigerator warms the room air, a building gets hot during peak hours, an internal combustion engine generates high-temperature exhaust gases, and electronic components get warm when in operation. Instead of being "wasted" by release into the ambient environment, sometimes waste heat (or cold) can be used by another process (such as using hot engine coolant to heat a vehicle), or a portion of heat that would otherwise be wasted can be reused in the same process if make-up heat is added to the sys ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Turbosteamer
A turbosteamer is a BMW combined cycle engine using a waste heat recovery unit. Waste heat energy from the internal combustion engine is used to generate steam for a steam engine which creates supplemental power for the vehicle. The turbosteamer device is affixed to the exhaust and cooling system. It salvages the heat wasted in the exhaust and radiator (as much as 80% of heat energy) and uses a steam piston or turbine to relay that power to the crankshaft. The steam circuit produces and of torque at peak (for a 1.8 straight-4 engine), yielding an estimated 15% gain in fuel efficiency Fuel efficiency (or fuel economy) is a form of thermal efficiency, meaning the ratio of effort to result of a process that converts chemical energy, chemical potential energy contained in a carrier (fuel) into kinetic energy or Mechanical work, w .... Unlike gasoline-electric hybrids, these gains increase at higher, steadier speeds. Timescale BMW has been the pioneer of this concept as early as 2 ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
General Electric LM2500+
The General Electric LM2500 is an industrial and marine gas turbine produced by GE Aviation. The LM2500 is a derivative of the General Electric CF6 aircraft engine. As of 2004, the U.S. Navy and at least 29 other navies had used a total of more than one thousand LM2500/LM2500+ gas turbines to power warships. Other uses include hydrofoils, hovercraft and fast ferries. In 2012, GE developed an FPSO version to serve the oil and gas industry's demand for a lighter, more compact version to generate electricity and drive compressors to send natural gas through pipelines. Design and development The LM2500 was first used on the US Navy in 1969, after the original FT-4 gas turbines experienced many technical problems. Later, they were used in US Navy warships in the of destroyers and the related , which were constructed from 1970. In this configuration it was rated to . This configuration was subsequently used into the 1980s in the s, and s. It was also used by one of People's R ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |
|
Cruise Ship
Cruise ships are large passenger ships used mainly for vacationing. Unlike ocean liners, which are used for transport, cruise ships typically embark on round-trip voyages to various ports of call, where passengers may go on Tourism, tours known as "shore excursions". Modern cruise ships tend to have less hull strength, speed, and agility compared to ocean liners. However, they have added amenities to cater to water tourism, water tourists, with recent vessels being described as "balcony-laden floating condominiums". there were 302 cruise ships operating worldwide, with a combined capacity of 664,602 passengers. Cruising has become a major part of the tourism industry, with an estimated market of $29.4 billion per year, and over 19 million passengers carried worldwide annually . The industry's rapid growth saw nine or more newly built ships catering to a North American clientele added every year since 2001, as well as others servicing European clientele until the ... [...More Info...]       [...Related Items...]     OR:     [Wikipedia]   [Google]   [Baidu]   |