|
Alpha 21464
The Alpha 21464 is an unfinished microprocessor that implements the Alpha instruction set architecture (ISA) developed by Digital Equipment Corporation and later by Compaq after it acquired Digital. The microprocessor was also known as EV8 (codenamed Araña). Slated for a 2004 release, it was canceled on 25 June 2001 when Compaq announced that Alpha would be phased out in favor of Itanium by 2004. When it was canceled, the Alpha 21464 was at a late stage of development but had not been taped out. The 21464's origins began in the mid-1990s when computer scientist Joel Emer was inspired by Dean Tullsen's research into simultaneous multithreading (SMT) at the University of Washington. Emer had researched the technology in the late 1990s and began to promote it once he was convinced of its value. Compaq made the announcement that the next Alpha microprocessor would use SMT in October 1999 at Microprocessor Forum 1999. At that time, it was expected that systems using the Alpha 21464 wo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Microprocessor
A microprocessor is a computer processor (computing), processor for which the data processing logic and control is included on a single integrated circuit (IC), or a small number of ICs. The microprocessor contains the arithmetic, logic, and control circuitry required to perform the functions of a computer's central processing unit (CPU). The IC is capable of interpreting and executing program instructions and performing arithmetic operations. The microprocessor is a multipurpose, Clock signal, clock-driven, Processor register, register-based, digital integrated circuit that accepts binary code, binary data as input, processes it according to instruction (computing), instructions stored in its computer memory, memory, and provides results (also in binary form) as output. Microprocessors contain both combinational logic and sequential logic, sequential digital logic, and operate on numbers and symbols represented in the binary number system. The integration of a whole CPU on ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Set-associative
Cache placement policies are policies that determine where a particular memory block can be placed when it goes into a CPU cache. A block of memory cannot necessarily be placed at an arbitrary location in the cache; it may be restricted to a particular cache line or a set of cache lines by the cache's placement policy. There are three different policies available for placement of a memory block in the cache: direct-mapped, fully associative, and set-associative. Originally this space of cache organizations was described using the term "congruence mapping". Direct-mapped cache In a direct-mapped cache structure, the cache is organized into multiple sets with a single cache line per set. Based on the address of the memory block, it can only occupy a single cache line. The cache can be framed as a column matrix. To place a block in the cache * The set is determined by the index bits derived from the address of the memory block. * The memory block is placed in the set identif ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Microprocessor Report
''Microprocessor Report'' is a newsletter covering the microprocessor industry. The publication is accessible only to paying subscribers. To avoid bias, it does not take advertisements. The publication provides extensive analysis of new high-performance microprocessor chips. It also covers microprocessor design issues, microprocessor-based systems, memory and system logic chips, embedded processors, GPUs, DSPs, and intellectual property (IP) cores. History and profile ''Microprocessor Report'' was first published in 1987 by Michael Slater (engineer). Original board members included Bruce Koball, George Morrow, Brian Case, John Wakerly, Nick Tredennick, Bernard Peuto, Rich Belgard, Dennis Allison, and J H Wharton all of whom served for many years. Slater left MicroDesign Resources (MDR), at the end of 1999. Slater's company MDR, based in Sebastopol, California, originally published ''Microprocessor Report.'' MDR also hosted an annual conference, the Microprocessor Forum, and r ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Multi-core Processor
A multi-core processor (MCP) is a microprocessor on a single integrated circuit (IC) with two or more separate central processing units (CPUs), called ''cores'' to emphasize their multiplicity (for example, ''dual-core'' or ''quad-core''). Each core reads and executes Instruction set, program instructions, specifically ordinary Instruction set, CPU instructions (such as add, move data, and branch). However, the MCP can run instructions on separate cores at the same time, increasing overall speed for programs that support Multithreading (computer architecture), multithreading or other parallel computing techniques. Manufacturers typically integrate the cores onto a single IC Die (integrated circuit), die, known as a ''chip multiprocessor'' (CMP), or onto multiple dies in a single Chip carrier, chip package. As of 2024, the microprocessors used in almost all new personal computers are multi-core. A multi-core processor implements multiprocessing in a single physical package. Des ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Dielectric
In electromagnetism, a dielectric (or dielectric medium) is an Insulator (electricity), electrical insulator that can be Polarisability, polarised by an applied electric field. When a dielectric material is placed in an electric field, electric charges do not flow through the material as they do in an electrical conductor, because they have no loosely bound, or free, electrons that may drift through the material, but instead they shift, only slightly, from their average equilibrium positions, causing dielectric polarisation. Because of Polarisation density, dielectric polarisation, positive charges are displaced in the direction of the field and negative charges shift in the direction opposite to the field. This creates an internal electric field that reduces the overall field within the dielectric itself. If a dielectric is composed of weakly Chemical bond, bonded molecules, those molecules not only become polarised, but also reorient so that their Symmetry axis, symmetry axes a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Silicon-on-insulator
In semiconductor manufacturing, silicon on insulator (SOI) technology is fabrication of silicon semiconductor devices in a layered silicon–insulator–silicon substrate (materials science), substrate, to reduce parasitic capacitance within the device, thereby improving performance. SOI-based devices differ from conventional silicon-built devices in that the silicon junction is above an electrical insulator, typically silicon dioxide or sapphire (these types of devices are called silicon on sapphire, or SOS). The choice of insulator depends largely on intended application, with sapphire being used for high-performance radio frequency (RF) and radiation-sensitive applications, and silicon dioxide for diminished short-channel effects in other microelectronics devices. The insulating layer and topmost silicon layer also vary widely with application. Industry need SOI technology is one of several manufacturing strategies to allow the continued miniaturization of microelectronic device ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Copper Interconnect
Copper interconnects are used in integrated circuits to reduce propagation delays and power consumption. Since copper is a better conductor than aluminium, ICs using copper for their interconnects can have interconnects with narrower dimensions, and use less energy to pass electricity through them. Together, these effects lead to ICs with better performance. They were first introduced by IBM, with assistance from Motorola, in 1997. The transition from aluminium to copper required significant developments in fabrication techniques, including radically different methods for patterning the metal as well as the introduction of barrier metal layers to isolate the silicon from potentially damaging copper atoms. Although the methods of superconformal copper electrodepostion were known since late 1960, their application at the (sub)micron via scale (e.g. in microchips) started only in 1988-1995 (see figure). By year 2002 it became a mature technology, and research and development effo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
CMOS
Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss ", , ) is a type of MOSFET, metal–oxide–semiconductor field-effect transistor (MOSFET) semiconductor device fabrication, fabrication process that uses complementary and symmetrical pairs of p-type semiconductor, p-type and n-type semiconductor, n-type MOSFETs for logic functions. CMOS technology is used for constructing integrated circuit (IC) chips, including microprocessors, microcontrollers, memory chips (including Nonvolatile BIOS memory, CMOS BIOS), and other digital logic circuits. CMOS technology is also used for analog circuits such as image sensors (CMOS sensors), data conversion, data converters, RF circuits (RF CMOS), and highly integrated transceivers for many types of communication. In 1948, Bardeen and Brattain patented an insulated-gate transistor (IGFET) with an inversion layer. Bardeen's concept forms the basis of CMOS technology today. The CMOS process was presented by Fairchild Semico ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Glue Logic
In electronics, glue logic is the custom logic circuitry used to interface a number of off-the-shelf integrated circuits. This is often achieved using common, inexpensive 7400- or 4000-series components. In more complex cases, a programmable logic device like a CPLD or FPGA might be used. The falling price of programmable logic devices, combined with their reduced size and power consumption compared to discrete components, is making them common even for simple systems. In addition, programmable logic can be used to hide the exact function of a circuit, in order to prevent a product from being cloned or counterfeited. The software equivalent of glue logic is called glue code. Usage Typical functions of glue logic include: * Simple logic functions. * Address decoding circuitry used with older processors like the MOS Technology 6502 or Zilog Z80 to divide up the processor's address space into RAM, ROM and I/O. Newer versions of these processors, such as the WDC 65816 or the Zi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Multiprocessing
Multiprocessing (MP) is the use of two or more central processing units (CPUs) within a single computer system. The term also refers to the ability of a system to support more than one processor or the ability to allocate tasks between them. There are many variations on this basic theme, and the definition of multiprocessing can vary with context, mostly as a function of how CPUs are defined ( multiple cores on one die, multiple dies in one package, multiple packages in one system unit, etc.). A multiprocessor is a computer system having two or more processing units (multiple processors) each sharing main memory and peripherals, in order to simultaneously process programs. A 2009 textbook defined multiprocessor system similarly, but noted that the processors may share "some or all of the system’s memory and I/O facilities"; it also gave tightly coupled system as a synonymous term. At the operating system level, ''multiprocessing'' is sometimes used to refer to the executi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
Router (computing)
A router is a computer and networking device that Packet forwarding, forwards data packets between computer networks, including internetworks such as the global Internet. Routers perform the "traffic directing" functions on the Internet. A router is connected to two or more data lines from different IP networks. When a data packet comes in on a line, the router reads the network address information in the packet header to determine the ultimate destination. Then, using information in its routing table or routing policy, it directs the packet to the next network on its journey. Data packets are forwarded from one router to another through an internetwork until it reaches its destination Node (networking), node. The most familiar type of Internet Protocol, IP routers are Residential gateway, home and small office routers that forward IP packet (other), IP packets between the home computers and the Internet. More sophisticated routers, such as enterprise routers, conne ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] [Amazon] |
